1 / 10
Beyblade X Sword/Hold Launcher Grip /Dual  Launcher MOD — zdjęcie 1
1 / 10

Beyblade X Sword/Hold Launcher Grip /Dual Launcher MOD

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3d Printed Grip for the X Launchers

Ocena
0 / 5
Polubienia
56
Pobrania
781
Wydruki
1
Wyświetlenia
5667
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

 A MOD that customizes TAKARA TOMY's starter launcher into a hold launcher or sword launcher.

After printing, you may need to trim or make minor adjustments to match the actual dimensions.

There is no locking mechanism, so if you are concerned about it, please do something about it yourself.

Printed on a Prusa mk3s with ABS

 

  • .2mm Layer Height
  • 10% Infill
  • Normal supports everywhere
  • Partially place support blockers

Part Model 

  •  x2 M3x20mm screws
  •  x2 M3x5mm Lx5mm OD knurled insert nuts 

Multi string default louse fit part2

 If you are installing it sideways, if the screws interfere with the launcher, you may need to file down the screw heads yourself.


Example Photo 1

TAKARA TOMY's Winder L Launcher

winder part1 LR hole slim

LLgrip part2 LR winder hole

longgrip 69mm middle-ab LR winder hole

lock part1 v2 x2

 

 

Tagi