Fritz Repeater 3000 case / housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clean case for the Fritz!Repeater 3000
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A clean case for the Fritz!Repeater 3000 (did not test it on 3000AX/6000/6000AX but might fit)
I was mad about the shelfs that hold the original case, so I made my own based on the linked model
The button will be held in by the button on board
You'll need 2x threaded inserts M3x4x5 or deeper and 2 screws M3x4 or M3x8 (depending on how deep you melt in the inserts)
Case is simply glued down to the cabinet with some double sided mounting tape from TESA
I've added a shorter and a longer button, I do use the shorter one
To undo the original case: 2 screws on the bottom, rest is clipped in (long thin screwdriver and a prayer to the plastic god may help ;-) )
Printer: Creality K1C
Nozzle: 0.4mm unicorn
Material: ERYONE matte Pla
layer-height: 0.2
speed: middle to slow
infill: adaptive cubic 25% or more
support: manual support for the LAN and power cutouts and the button hole, not for the ventilation holes
Feel free to remix!