Ortlieb bag wall mount adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model builds on @Raybo's Ortlieb bag wall mount to add variable bike rack diameters and designs.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
You will need the base/wall mounts from @Raybo's Ortlieb bag wall mount.
These bar supports allow the use of dowels for individual clips or longer dowels that span multiple bag widths - giving some more flexibility. See the pictures.
If you're using a very long dowel, then print a through-support provided here. You will still need the @Raybo's designs for the dowel ends.
Printing
Lay flat, mirror end caps as needed, 40% infill is sufficient, 0.15mm.
Assembly
Use 16mm M3 cylindrical screws to bind bar supports to the @Raybo mount plate.
I used 4x16mm countersunk screws to attach the mounting plates to wood.
You will want alternate or longer screws if mounting to plaster or concrete.