Duet 2 Wifi Case - Workbee CNC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for mounting a Duet 2 WiFi controller on to the Gantry of a WorkBee CNC machine
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a case for a Duet 2 Wifi Controller, made primarily for fitting on a WorkBee CNC machine but it could be used else where.
I have added the files for both a left or right hand version so you can mount it either end of the gantry.
It requires the following for assembly:
1 x M3x5 Bolt - for IO door.
2 x M3x30 Bolts - for attaching the main door.
4 x M4x12 - for mounting the Duet 2
3 x M4 Nylock Nuts - for mounting the Duet 2
2 x 40x40x10mm DC Fans
2 x 40x40mm Fan covers with filters
8 x M3x20 counter sunk bolts - for mounting fans and filters
8 x M3 Nuts - for mounting fans and filters
2 x 8x5mm Neodymium magnets - for keep main door closed
1 x 6x2mm Neodymium magnets - for keeping IO door closed