1 / 3
Ball cap face shield
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Everyone has lots of ball caps around! Put them to good use, plus its the most comfortable headband I've seen. I made…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Everyone has lots of ball caps around!
Put them to good use, plus its the most comfortable headband I've seen.
I made this design simple and easy to print, only takes about 50 mins to print one. you can print 4 at once on the I3.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.3
Infill:
15% grid
Filament:
Prusament PLA PLA Pineapple Yellow
Notes:
Everyone has lots of ball caps around!
I made this design simple and easy to print, only takes about 50 mins to print one. you can print 4 at once on the I3.I know from printing many of the Prusa covid RC2/RC3 facemasks, that the PETG visor plastic is in very high demand. i was able to get a hold of some clear 8 1/2 x 11 projector sheets. I put them into a regular 3 hole punch and they should work great with this design. put the center hole in first and bend the frame slightly to get the other holes to align.
Thanks everyone for checking out my file.
-Spencer
Category: Glasses