Halloween Pumpkin Carving: Alien Fangs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🎃👽 Add intimidatingly spooky fangs to your jack-o-lantern carving! Small fangs for a secondary gourd mouth.
- Ocena
- 3 / 5
- Polubienia
- 39
- Pobrania
- 168
- Wydruki
- 2
- Wyświetlenia
- 787
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Share Alike
Printing Instructions
Profile: Any profile should be adequate, though the smaller fangs may benefit from a higher quality setting.
Supports Needed: Supports and brim are required for the large fangs, brim only for the small fangs.
IMPORTATION NOTE: Some slicers seem too have issues with the fineness of the sharp fang tips. If this is the case, try to use the "Blunted" versions.
Additional Materials
M3 Hex Head Screws: The large fangs with “M3” in the name are designed to fit tightly over M3 hex socket head screws with a 5mm head. The large teeth with “shank” in the name will not need any additional materials.
Assembly Instructions
M3 Large Fangs: Remove supports from inside the hole and carefully fit over hex head M3 screws. Poke the desired tooth location with skewer/nail/toothpick. push or twist screw (with tooth attached) into the poked hole.
Shank Large Fangs: Print with brim/supports, clear away support material, make hole as above, insert barbed shank into hole. (WARNING! this aspect of the design is untested, the included pictures show the M3 fangs being used).
Small Fangs: Inserted directly into poked hole in pumpkin/gourd. They are small enough generally stay put on their own.
Making Pumpkin Similar to Pictures
Cut a large hole in the front, wide enough to accommodate two rows of teeth and a small long necked gourd (about 150mm or so).
Using the pumpkins natural striations, cut rounded gums at the top and bottom.
Insert large fangs according to above assembly instructions into each of the gums.
Carve an opening into long necked gourd to accommodate the small fangs.
Insert small fangs according to above assembly instructions.
Secure smaller gourd to interior of pumpkin (I used wooden skewers through the “neck” of the gourd).
Description
Make a spooky Alien inspired Jack-O-Lantern that is sure to delight and fright! Large fangs can be added to any pumpkin, but is it really ready for Halloween without a SECOND row of fearsome fangs?! Add tiny fangs to a smaller long necked gourd to act as the additional Alien Mouth.