violin and case (or viola or cello)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Source:violin model heavily remixed from https://www.printables.com/model/447457-violinCase is a remix but I've lost…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 786
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Source: violin model heavily remixed from https://www.printables.com/model/447457-violin Case is a remix but I've lost the location of the original.
Hinge reworked from Parametric Hinge by rohingosling https://www.thingiverse.com/thing:2187167
Could be a violin or a viola :-) . If cello is desired, use the "cello body" which sports an endpin, and skip the chinrest & case. A cello box-stand is included.
Print Settings
Printer Brand:
Anycubic
Printer:
Vyper
Doesn't Matter
Supports:
Yes
Notes:
The STL files have small parts. I recommend at least 16X expansion to get a printable model. The body (top plate plus bouts) and bottom plate need supports; I found "tree mode" to work best.
Post-Printing
Rubber cement, being flexible, is a good choice to assemble the body and plates. Everywhere else I used gel-type superglue. File small grooves in the bridge to keep the strings in place. I used thin thread for the strings. Make a small loop at the tailpiece end, thread thru the loop, and glue to the tuning pegs. The tailpiece includes one fine tuner. The fine tuner is a separate face group, so you can easily duplicate it and add to the tailpiece as many times as desired.
The case is supplied in two versions: with and without hinges, so you can make/use different hinges and glue them on if desired.
Category: Music