Taxa Mantis Camper Folding Table Wall Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a folding table to the wall, even with the strange angles.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 365
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Simple folding table to be installed above table next to main door. Wall is at an angle so bracket needed to sit level. Also I didn't want it to be supported by nut-rivets in aluminum wall alone, so it also connects to steel frame at top.
For strength and temperatures expected I used PETG. Also printed solid since I wanted as strong as possible. So far so good!
Will need to print two.
Bracket: https://www.amazon.com/dp/B09M6N8G3B?psc=1&ref=ppx_yo2ov_dt_b_product_details
Top: https://www.amazon.com/dp/B07D1L73S3?psc=1&ref=ppx_yo2ov_dt_b_product_details
Folding Bracket Bolts: Socket head cap M6 screws I had laying around
Folding Bracket Nuts: https://www.mcmaster.com/97258A104/
Printed Bracket to Wall Bolts: https://www.mcmaster.com/97654A229/
Printed Bracket to Wall Nuts: https://www.mcmaster.com/97467A693/
Post Processing:
Might have to ream out the holes with drill. Also had to tap in the square nuts with hammer and punch.