1 / 5
MX5 Magsafe iPhone 14 Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the original for the iPhone 14 with a Spigen case. It adds "wings" to help hold the phone in place.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 442
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I included a paramaterized Fusion 360 file if anyone would like to modify it for their needs.
Print suggestions:
I printed with:
- 4mm nozzle
- 0.2mm layer height
- PETG (would recommend ABS or material more suited for UV/heat)
- Tree supports (only touching build plate)
- 1.6mm walls
- 20% gyroid infill
- Printed on a 60 degree angle with part 3mm of the top submerged under the build-plate to help the model adhere to the build plate.
Differences from the original:
- Made for Apple Magsafe Charger
- Specifically made for iPhone 14 with Spigen case
- Has “wings” to help hold the iPhone in place when hitting bumps or going around corners
- Adds a “cutout” at the bottom of the magsafe holder large enough for a flat-head screwderiver to help pry out magsafe charger when needed.