Low Profile 4 Barrel Carb or Throttle Body air hat filter adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this for a Fitech EFI but should work with any 4 barrel carb or EFI. Print in ABS or Nylon, I used ABS
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 488
- Wydruki
- 2
- Wyświetlenia
- 1837
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I had hood clearance issues and didn't like the price of metal low profile hats so I made my own.
In my application its on a Fitech 2 barrel, but should fit any 4 barrel.
Print in ABS or Nylon, I printed in Polymaker ABS and it works fine.
This is 100% overkill but I printed at 0.08mm layers, 6 walls, 9 top and 9 bottoms, 15% infill. On my Bambu X1C (currently printing ill post pictures when its done)
Turning on Fuzzy skin with 0.2/0.2 gives a nice texture to the part.
Only need to paint on supports on the bottom for the recess, and bridged section just inside inside the opening.
First picture is the original prototype, Ill post more when the final is finished printing