Wittmayer Hapsichord Jack with Tongue
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version 1.0 of a replacement Jack and Tongue for a Wittmayer Hapsichord.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Version 1.0 of a Hapsichord jack and tongue for delrin quil replacement on my Wittmayer Hapsichord DBP 9219008.
This project aims to offer a simple replacement by using delrin quills. Instead of stuffing the delrin ones into the old tongues inrevertably, it aims to replace them by 3D-Printed parts that actual fit to size.
Since all other parts are still intact and working nicely, I did not model the rest of the instrument.
This model will be updated if there are any changes required for making it playable, currently this is a proof-of-concept only.
Further parts and dimensions
For assembly of jack and tongue you will also need:
On the tongue:
- delrin quill, e.g. https://www.vogel-scheer.de/de/mechanik/1-3-plektra/delrin-plektra-vorintoniert.html
- approx 18mm of 0.5mm dia spring steel wire
On the jack:
- a 10mm diameter lead weight
- a 10mm M2 screw with excentric head for regulating the quills distance to the string
- 50mm of M2 threaded rod and 2 M2 nuts
For connecting both:
- 15mm of 1mm dia steel wire as an axle
Find full MCAD data at https://github.com/dickenhobelix/hapsichord_jack/releases/tag/v1.0.0