Cold Air intake Adapters (3 inch) for 5th Generation Toyota Celica (1990-1994)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapters to run custom cold air intakes with stock air sensor and air box resonator tubing for 5th Gen Toyota Celica.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 838
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are adapters to run custom cold air intakes with a stock of the air sensor and air box resonator tubing (if desired) for the 5th Gen Toyota Celica (1990-1994). The user must buy all intake components with 3-inch diameter and a 3-inch to 2.5-inch adapter to fit the 3-inch components to the intake. The user also can change the Fusion 360 Files that are provided or contact me if you do not have Fusion 360 and need a different diameter.
Print in Nylon or another thermally resistive material. The “cold air to tubing air sensor.stl” goes from the cold air intake to the tubing and has a slot to run the air box sensor. The “intake manifold to tubing.stl” goes from the other end of the tubing to the intake manifold and has a slot for the air box resonator if you do not like intake sounds. If you prefer intake sound do not print this part or print “intake manifold to tubing (no resonator).stl”.
For questions or concerns email me at [email protected]