1 / 3
Enclosure handles for 10mm x 3mm magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits 10mm x 3mm magnets
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 48
- Wydruki
- 2
- Wyświetlenia
- 359
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (24)Powiązane
This is a remix of Turtle_Dude's enclosure knobs. the same hole indents fit my 10mm x 3mm magnets. I shifted the indents up slightly to give a thicker support around the magnet as the lower edge kept breaking when I inserting the magnets. I also made the thickness of the handles a bit shallower to clear the distance between my acrylic panel and the top of the table (Or bottom if you're mounting it on the bottom).
I printed these at
.2mm layer height
15% infill
PETG