JBL Flip 6 Bike Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to hold your flip 6 speaker or one of the same dimensions to the frame of your bike as well ass further protect
- Ocena
- 3 / 5
- Polubienia
- 18
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 1348
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this to fit most bike frames and logo as well as controls are all accessible from the outside. The controls and logo line up with the windows. It is a pretty snug fit but just in case there is a lid for the case. I out two magnets on the inside the lid and the body to snap hold the lid in place. It will hold without it but for added protection. It is printed in TPU at .3 for the line width and at 55mm / sec on the speed. I also printed mine with the walls being printed I/O/I. The nozzle was at 235 and the bed at 65.
This also has channels and slots for velcro or quick ties to attach this to the frame. Not included.