1 / 3
Band-Aid Bandage Holder — zdjęcie 1
1 / 3

Band-Aid Bandage Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A storage container for bandages sized up to and around 40mmx100mm (~1.5inx4in).

Ocena
5 / 5
Polubienia
28
Pobrania
206
Wydruki
2
Wyświetlenia
782
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Medical Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple bandage box designed for a common size of bandages (100mmx40mm,  ~1.5inx4in). Smaller bandages will obviously fit too. The smallest usable length is about 60-70mm (2.5in). Any width up to 10mm (0.5in) will work well. It holds about 5 bandages comfortably, so it is perfect for on the road.

This is inspired by the design by Sandy Wrestler and improves on it in many ways:

  • The keychain part is optional, so you can print it as a box.
  • There is no internal clip, which simplifies printing.
  • There is an internal slope to make it easy to slide bandages out with just one finger.
  • The design is optimised for FDM printing (no supports).
Print Instructions

This design uses a very small bottom area, and is mostly printed at a 45° angle. This makes it possible to print without any supports and still provides strong layers for the keychain attachment. You need a properly tuned printer with good bed adhesion and no head drag.

Print the model with a brim.

When loading the model it will detect a multi-part object. Load it as a single object to print the model with the keychain ring. Load it as a multi-part object if you don't want the keychain ring, then delete the keychain object. 

STEP file is included if you want to tinker with it yourself.

Tagi