Kinect v1 (Xbox 360) GoPro action camera mount + Decoy board case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the original stand (dropped out every unnecessary parts for a 3D scan purpose).
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 667
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For me the stripped down electronics for Kinect Lite project didnt work (Windows applications) I needed to use the original housing, so a mount was neccessary. Modeled a replacement part with a GoPro compatible mount, which is intercahngeable with the original plastic part with a ball joint on it. With this solution I can mount the camera to my 3D printed tripod/handle (this)
As this solutuion needs a 12V input, and a wall adapter is bulky and a pain of use, I made an addigitonal PD Decoy board case, so I can power the Kinect cam from my power bank. These STLs are attached.