1 / 1
Tough latches with space for 1.8mm dowel pins — zdjęcie 1

Tough latches with space for 1.8mm dowel pins

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The dowel pins I ordered were 1.8mm instead of 1.5mm so I had to increase the holes diameter by 0.2mm to get them to fit

Ocena
0 / 5
Polubienia
0
Pobrania
16
Wydruki
1
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Despite the dowels being advertised as M1.5 they were not 1.5mm diameter but closer to 1.7-1.8mm

I remixed both 4mm and 6mm versions by punching cylinders through the holes to cut a wider hole in FreeCAD. Probably not the best way to do it but it works. 

I could not for the life of me get the dowels to fit without cracking the plastic, 0.2mm extra headroom made all the difference.