Vinyl Record Stand - Fits multiple
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of existing stand design to make it easier to print and to add the possibility of adding weight to the part.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The Vinyl stand is designed to be easily printed in both “normal flat position” and printed upright along the length of the part. The grooves in the stand are bigger so that they can easily hold one vinyl record in each groove. The overall design is more visually pleasing and is a piece that i would happily show off in my living room. For more stability i would recommend you added “anti-slip” pads/feet to the bottom of the stand.
I've printed it with a 0.6mm nozzle for a quicker finish time, but 0.4mm nozzle is also fine.
Recommend:
Print upright for best finish
3 perimiters walls
Brim with >5 mm width
0.2 - 0.3 mm layer height is fine
Infill can be 10% or higher
I've printed it in white PETG for looks and solidity,
but PLA should be more then sufficient as the part sees no notable load.