1 / 8
CB-radio desk stand, fits President Washington — zdjęcie 1
1 / 8

CB-radio desk stand, fits President Washington

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Desk stand for a president washington (or george II)

Ocena
0 / 5
Polubienia
25
Pobrania
367
Wydruki
1
Wyświetlenia
1860
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The stand is designed for m3 threaded inserts. The legs are attached via m3 bolts and nuts and are collapsible. The feet should be printed in TPU and superglued to the housing/legs. It fits with or without the fans attached to the radio. 

The original mounting screws are used to keep the radio fixed in the stand. Use a coin to screw them in. 

The mic-plate can be mounted on the left or on the right (add threaded inserts on the side you choose, the microphone bracket holes are also available for both orientations). 

The handles are friction fit into the main housing. The tolerances of your printer should be calibrated well.

Update: Two new versions of the feet with honeycomb structure and hidden screw heads. Main housing v 1.1 with an indentation for the M3 nut.