Homer Simpson spice rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spice rack inspired by legendary Homer Simpson creation from series 2
- Ocena
- 5 / 5
- Polubienia
- 197
- Pobrania
- 360
- Wydruki
- 1
- Wyświetlenia
- 3545
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Spice rack inspired by legendary Homer Simpson creation from series 2
Model needs little bit experiences with 3D printing, not so easy to print, be patient
The rack is printed of one piece without nails.
Use tree supports, "hybrid tree" seems to me best. Block supports on back plate in grooves.
Tested only with Bembulab A1 mini - I had to rotate 50° and scale to 55% to fit the bed diagonaly. Don't forget to scale nails too.
There are two versions of rack:
- Homer-Simpson-spice-rack.stl - version without flat back side - use for free stand
- Homer-Simpson-spice-rack-wall-mount.stl - Version with flat back side and with holes for hang it.
There are two versions of nails:
- nail-straight.stl - straight nail - need supports
- nail-bent.stl - nail bent to buildplate printable without supports
Assembly:
Remove supports, in some cases (depends on flow calibration, print temp, cooling etc…) the holes for nails needs to be drilled to make it possible to put nails in.
You can bend nails to shape just by heating them with lighter.
Top center nail needs to be cut in half to fit according the Homers one.