1 / 5
Geometric Tool Holder / Organizer for 3D Printing, Electronics, Artists, Hobby
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Geometric 3D Tool Holder Designed this myself to hold the tools I use regularly when printing. Added some additional…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
Designed this myself to hold the tools I use regularly when printing. Added some additional holes / cutouts for extra stuff for the future.
Features
- Geometric design
- Easy to print (no supports!)
- Versatile design can fit a multitude of tools
- Top / Deep Area
- 3mm, 5mm, and 7mm holes
- 8 rectangular holes for pliers, calipers, brushes, etc.
- Front holes are shallower than the rest (see CAD screenshot for heights)
- Glue Stick Hole
- 1 rectangular hole
- 5x 3mm holes for allen keys / small screwdrivers
- Build Plate Holder
- 1mm slot on the side for standing up a build plate alongside the tower.
Printing Notes
- Increase the number of walls to around 3 or 4 so that it can withstand metal tools banging around inside.
- The more infill you add, the heavier it will be and the more sturdy it will rest on your desk. 25% infill with Lines/Grid infill will require ~330g of filament but the thing will feel rock solid.
- For PrusaSlicer users, the variable layer height works well (as pictured above), if the sloped areas / tool openings are printed at the lowest settings (0.07) and the rest is printed at the highest (0.25-0.3mm), you get some really nice detail without sacrificing print time!