Fishing - Trolling Fly Head blank - two styles with printable eyes! UPDATED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base head for 3-inch trolling flys. Just add eyes and feathers.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 523
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
UPDATED - now another fly head shape with a rounder head and larger eye holes. Base head part for building your own trolling flys, sometimes called umbrella flys. Picture should make it clear.
I also added a simple printable/resizable glue-on eye - these look 3D in the water and you can make the base one color and the pupil a different color with a color change. Get your bed adhesion skills up to par and print a dozen or more eyes at a time.
The eye size for the smaller fly head is 5.5 or 6mm - depending on whether you use the sizer to shrink/grow the eye spots. The larger head has 9.5mm eye spots.
Print in PETG or ABS. PLA will melt in the sun on a hot day. Stand on the “back” end (as opposed to the nose end) and add a brim. Print at high resolution - such as .1mm or .15 quality.
Stick on 5.5mm or 6mm eyes can be had most anywhere (ebay, amazon, etc). Or model your own 3D eyes!