1 / 1
M-LOK Angled Fore Grip (AFG)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An AFG inspired by the Magpul M-LOK AFG (MAG598). Designed to print easily and feel very stable.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 1622
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (47)Powiązane
The all black AFG in the cover photo is this model, compared with the model linked below partially painted in the back. It was almost what I wanted, but I had a few tweaks I wanted to make.
https://www.printables.com/model/666254-m-lok-afg-no-supports
Some notes about the changed design features.
- Massively reduce overhands.
- A slightly more aggressive barrier stop.
- The tabs now fit more tightly in the M-LOK slots.
- Tabs chamfered to permit vertical printing.
- Assume a 15mm M-LOK rail face. This is the most common, but means this AFG will not fit all rails. Confirmed to fit on a PSA 13.5" M-lok Billet Rail.
- Teardrop shaped screw holes for easier printing.
Notes on my print:
| Printer | Voron V0 |
| Nozzle | Revo High Flow 0.4mm |
| Filmanet | Black Overture TPU |
| Layer Height | 0.2mm |
| Shells | 5 (top, bottom, and perimeter) |
| Infill | 30% Gyroid |
| Nozzle Temperature | 230C |
| Fan | 100% |
Source:
https://cad.onshape.com/documents/12538903204e684d94de1cbb/w/4e1a38ccb41be6569ef3c480/e/3e1ece04d94aed51f20466b7?renderMode=0&uiState=6727d854a74d9b77d0d6c14d