1 / 1
Bouldering Hangboard with Crimps and Chin-up holds
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy-to-print hangboard features three crimp holds with a top jug hold for chin-ups
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
This easy-to-print hangboard features three crimp holds (10mm, 20mm, and 30mm), along with a top jug hold for chin-ups. I printed mine in PLA with a layer height of 0.20mm and 20% infill (I weight about 155lb).
When attaching it to the wall, be sure to screw into a stud for added strength. I would advise caution when using drywall anchors, as their ratings are for static loads (e.g. hanging) and not dynamic loads (e.g. pull-ups).