E3NG pom wheel spool roller with adjustable width
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spool holder designed to reuse the pom wheels from a stock ender 3, because more parts reused = more better.
- Ocena
- 4,333 / 5
- Polubienia
- 41
- Pobrania
- 272
- Wydruki
- 4
- Wyświetlenia
- 1158
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a spool holder designed to reuse the pom wheels from a stock ender 3, because more parts reused = more better. @MaxS on discord has fixed some of the problems it had, and improved the design (it now uses m5 screws as a shaft and the locknuts the wheels use on a stock ender instead of a small plastic bit, you should have the right size from back 2040 extrusion mod, or you can use stock ones and either cut to length or leave as is because it's fine if it pokes out a bit), he and @Nmorelm have helped me test the design and have supplied photos, so now it should work perfectly. all you do is download the file and put it in your slicer, make sure to only add the model files not print profiles.
you need:
4x lock nuts (from stock ender)
4x pom wheels (from stock ender)
4x m5x20 button-head screws
2x m3x20 screws
2x m3 nuts