Work/shop light eye guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully parameterized, tileable guard for blocking direct eye contact with led or fluorescent shop lights.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The model slots into itself so it can be tiled for arbitrary distances.
Measure the span you want to block, and adjust the maximum length parameter so it is a perfect factor of your length (or else just use the existing 3mf file and cut the last print to size, I'm not the boss of you).
Pictured is 4.5 prints tiled for a 4' worklight.
Sized for screws (2 each) with a 4.5mm diameter thread, and an 8mm head (parameters tho, so change 'em if needed).
See images for list of parameters.
The supplied .3mf file is 50mm high by 285mm long, and prints on a standard ender3 bed diagonally.
Optimized for a p8 nozzle, although if you have a p10, you can try changing the nozzle width parameter (hopefully that works, might have to nudge a sketch around worst case).
You could also use a piece of wood, but where's the fun in that.