1 / 4
Loudener - Novelty PCAR for 16mm barrels
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Sillybutt's Spigot PCAR found commonly on his SLAB and Cynthia designs.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (10)Powiązane
Silly loudener (Pun intended) that is hopefully not that obstructive.
You will also need to print a collet from the original files (make sure to give silly a like also) and a 16mm ID o-ring to get a functioning seal. Print upside down, with a lot of brims on both outside and inside.
MAKE SURE THE SEAM LINE IS ON THE OUTSIDE! If it is in the inside, the PCAR won't function properly.