Menina Bag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printed fabric patterns for a bag inspired by the lace and victorian style.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Let's try 3D textiles! Print this bag inspired by the lace and completely functional.
You can play with the Z scale; I don't recommend making it bigger than 1 mm in total. You're able to play with all of the infill patterns and percentages ,but remember to make the “Top shell layers” and “Bottom shell layers” value go to 0. Print one layer, don't remove it from the bed, print another one over it, and go on until you get to the desired result. Experiment with values, these are quick and light prints. Note: I did the borders thicker for better support while using it.
After you have all your pieces, I used a soldering iron to put them together, first the 3 pieces of the border and then the rest.
The handle's assembly space is of 0.9 mm, they can be put together with pressure, but I would also recommend using the soldering iron for better resistance.