Heat Pump - Wärmepumpe - Business Card Holder - No Multmaterial Setup needed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of a heat pump which can be used as a desktop stand for business cards or something else.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of a heat pump which can be used as a desktop stand for business cards or something else. You dont need a MultiMaterial Setup to print this. Just one filament switch within the process. Its made out of 4 parts.
Print the propeller before the upper part. When printing the upper part insert a pause at 13mm height. Then insert the propeller. At 15,2mm height, do a filament switch with your color of choice.
It has a high clearance for the pins, so it should print easily also with not perfectly dialed in printers.