Nissan XTERRA (2nd Gen) Model 10cm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully custom 10cm Nissan XTERRA model with Lego-like snap-on wheels that roll. Entire assembly is 6 parts.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 591
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this 2014 Nissan XTERRA model from just a picture so that I could use it in a paint-by-number style gift for a friend. The XTERRA body prints in two parts (driver and passenger) which each have a slot particularly sized for either side of a quarter. The quarter is used to locate/hold in place the sides while supergluing them together. The wheels (and pegs on the body pieces) were also specifically toleranced to allow the wheels to snap onto the body and spin freely (like a Lego car).
*I forgot to take photos of the actual print so enjoy the renders I made lol
My Print Settings:
- PLA (personal choice)
- 0.2mm layer height (feel free to reduce this for a higher quality print)
- 15% infill (nothing is very structural on any of the prints so this is sufficient)