1 / 3
Knog_Plus_Bike_Mount_Screwed
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As my previous model was too attractive it has been stolen after only one night outside. So I designed one with screws.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As my previous model was too attractive it has been stolen after only one night outside.
So I designed one with screws.
Two version in the tree: 22.2mm and 28.6mm
Free to you to copy a body and then modify to your need.
I used TPU and M3 inserts from Ruthex and M3*20mm screws.
Thanks to TPU and longer screws my 22.2 was able to fit on the 25.4mm section of my handle bar.