KidCo Configure Gate Wall Mounting Plate -- Old Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting plate to connect KidCo Configure Gate to the wall (old style of gate mount)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a wall mounting plate for a KidCo ConfigureGate. It is NOT for their current style of gate. This is their older mounting method – my gate was purchased in the mid 2000s. I took measurements off of the original hardware and designed to fit.
It works well printed in PLA, I used 4 perimeters for extra strength. The little retention tab is weak compared to the molded original, but it's fully effective.
Requires support to print. The model is oriented correctly for printing, but will need to be rotated to fit on the build plate. It just fits on a Prusa XL.