1 / 2
Single Thin Expo Magnetic Marker Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic holder for one of the thin variety of Expo brand dry erase markers. Files for multiple magnet sizes.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Printing Instructions
- Profile: Higher quality profile recommended due to the small size of the prints.
- Supports Needed: I printed with base plate supports to ensure the magnet holes were clean. If you have faith in your printers bridging ability, you could possibly be fine without supports (especially for the smaller magnets.)
Additional Materials
Any of the following magnet sizes:
- 6x3
- 6x2
- 10x3
- 8x3
Assembly Instructions
Tolerances for the magnet holes should be close enough that a compression fit is adequate, though a drop of glue couldn't hurt, especially for the larger magnets.
Description
A minimalist design for a magnetic holder that will accommodate a single thin Expo marker. A relief "T" indicates the holder top due to the slight taper of the markers. Files are included for a variety of magnet sizes that you might have laying around!