mk3 Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) S2S69c recessed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
another bracket for the S2S69C midranges to suit the 2019+ SK forester
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up.
my print was done with PETG in matt black, using tree supports in prusa slicer. its not yet finished the print.
best to print this in PETG or ABS, as with direct sun, it could get quite hot!
mirror the 2nd print, so you get the slot at the same “end” of both of them. this can be done in the prusa slicer easily, especially needed as there is a toe of around 10 degrees on them, to point closer to the middle of the car.
i found that my previous bracket sounded really good if your head was right in front of the rear view mirror. so they needed to be steeper, and pointed back a bit more.