Nerf LMTD Ace of Spades Replacement Cylinders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement cylinders for the Nerf LMTD Ace of Spades blaster
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 224
- Wydruki
- 0
- Wyświetlenia
- 1035
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Here are a few replacement cylinders for the Nerf LMTD Ace of Spades blaster. I have two full length dart styles available now, but I have a few in the experimental stage since I'm getting very mixed results.
These Cylinders don't require any hardware and don't need supports if oriented with the face down but if the base version might need supported on the corners depending on how well tuned your printer is. The smooth version is completely supportless and works fine however it occasionally gets stuck when inserting it into the blaster if it's exactly halfway between two of the orientations (if a corner of the cylinder is halfway between 2 of the corners in the blaster)
Experimental Half Dart Cylinders
I have a few files available for versions of the cylinders with print in place pushers designed for half darts, however I've been getting very inconsistent results when test firing them. These files are uploaded in case you want to try them still. The supported versions use detachable supports that can be easily removed by gently twisting the support and rotating it around the chamber slowly increasing the force till it breaks off
Thanks everyone for trying my files! Let me know if you have any issues or have any new styles you'd like to see.
