Flashforge AD5M Minimal Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reduced size and filament enclosure of FF AD5M
- Ocena
- 3,5 / 5
- Polubienia
- 86
- Pobrania
- 795
- Wydruki
- 1
- Wyświetlenia
- 10 240
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
FF AD5M minimal enclousure; Compatible with OG enclosure kit, no modification required
I also added thermal insulation on two side panels. Chamber temp reaches 100F when printing PETG @ 75C / 245C
Printed parts using 0.6mm nozzle w PETG @ 2 layers (Alternate extra wall disabled) w 5% infill, approx 570g filament used and works perfectly.
You can snap a thermometer on it, the cheapest one on Amazon fits. Files also include no-mount version.
Top parts are connected using duct tape, not elegant but very simple and effective.
I lowered the front door 5mm so it rattles against the bottom frame (no affect on the assembly and performance); adding a small foam/rubber pad will solve the issue.
Step file only includes my mod parts, no printer frame in the step, pls download from FF website