50cc motorcycle clutch lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One of the objects that most frequently breaks are levers, so I wanted to design a 3D lever that can be easily printed
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This project was born from a need...
I have been riding around on 2 wheels, bicycles, scooters, scooters and motorbikes since I was little. Doing damage to a motorbike is very simple, all it takes is for you to overbalance at a traffic light or for it to slip from your hands while you're moving it in the garage and then fall.
One of the objects that most frequently breaks are levers, so I wanted to design a 3D lever that can be easily printed in a short time with the 3D printer to ensure you have a TEMPORARY spare part.
Buying a clutch lever online takes days so this can only be used a few times and should only be used in essential cases.
This lever can be use surely with "Vent Derapage", but it is also compatible with a lot of others 50cc motorcycles.
I decided not to make the brake lever but only the clutch lever because if the clutch lever element were to break it would not pose a danger, but if the brake lever breaks it completely compromises the braking system, preventing braking.
I never tried to use some material wtch carbon fiber, mabye in can last longer, the first prototipe is printed with pla and last 40km of driving.