V-Spooler - Sunlu Filament Connector FC01 Add-On
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Splice some filament together on your V-Spooler or V-Spooler X
- Ocena
- 4,75 / 5
- Polubienia
- 71
- Pobrania
- 284
- Wydruki
- 4
- Wyświetlenia
- 4171
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
News: Via a request from my Printables club there is an alternative version of this model for V-Spooler and V-Spooler X models equipped with the new linear rail mod available on the Files tab!
This model was a request via Bsky. I am not sure how safe this is, so I am going to prefix this entire page with a safety warning - only connect the FC01 to the mount when you need to use it for the splicing. Let it warm up on the side first and take it off directly afterwards. It was probably not designed to be used at length in this orientation.
This model is a mount for the Sunlu Filament Connector FC01 for V-Spooler and V-Spooler X. The central part of the mount is TPU to allow snap-on fitment to V-Spooler and the splicer itself, with a supporting frame made of PLA (or whatever…).
The hardware needed to assemble this is:
6x M3 inserts (Ruthex or CNC Kitchen work)
6x M3 washers
6x M3x12 screws
To assemble, install the 6 inserts in the holes in the TPU bracket, and connect the frame with screws and washers. Done!
Here is a short video demonstrating its use:
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨