1 / 7
3D Filament Spool Holder Set - Dual Mounts & Interchangeable Attachments
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 types of mounts with 3 different length holders (1 x 1kg, 2 x 1kg, 3 x 1kg) 90° under table mount horizontal mount
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Standard Digital File License
Organize your 3D printing workspace with this durable, high-quality set of two 3D filament spool holders, designed for maximum versatility and robustness. This set features a horizontal mount and a 90-degree underside table mount, both equipped with interchangeable attachments to fit your needs.
4 screws needed for the underside mount
2 screws needed for the side mount
Key Features:
- Dual Mount Design: Choose between a practical horizontal
mount or an alternate 90-degree underside table mount,
ideal for varied printer workspace setups. - Interchangeable Attachments: Each mount includes three
horizontal attachments that can hold 1, 2, or 3 standard 1kg
spools. Swap attachments between mounts effortlessly to
tailor your setup. - Heavy-Duty Capacity: Built to endure the demands of 3D
printing, these spool holders (made with PLA filament) can
support spools weighing over 10kg (22lbs), avoiding unwanted
spool damage by preventing them from falling.
3D printing settings
- Layer height: 0.2mm
- Walls: 3
- Infill density: 15
- Infill pattern: grid
- Supports: none
- Build Plate Adhesion: none
- For the 3 attachment poles, a brim >= 10mm is recommended to prevent the print from falling