1 / 4
Router Table Levelling Mounts for Temu/Aliexpress etc. Router Table Insert
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of mounts for a Temu/Aliexpress router table insert with built in levelling system
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This is a set of mounts for a Temu/Aliexpress style router table insert, with built in levelling.
To use:
- Use the router to make a hole the same size as the router table insert plate into your tabletop
- Affix four corner pieces from underneath using with 4mm countersunk screws
- Optionally, fit four side pieces from underneath with 4mm countersunk screws
- Fit M5 pan head machine screws into outer holes of corner pieces from the underside (note the print is not threaded, tap your own threads with a tap or with the machine screw) and, if used, into one or both of the holes in the side pieces
- Insert router table insert plate and make flush by adjusting the M5 screws from underneath
- Secure the router table insert plate using M6 countersunk machine screws into the corner pieces from the top (again, these are not pre-threaded)
Temu/Aliexpress change all the time so I won't link to them. Plus multiple vendors sell the same thing. Hopefully you'll be able to see if my router plate is the same from my pictures.