Robosoccer Field

Parts required

• straight_10cm: 34
• straight_12cm: 4 for the short sides with the goal post
• straight_15cm: 2 for the long side
• goal_curve_1: 2
• goal_curve_2: 2
• bend: 4

Settings

For the regular version (assuming 0.2 - 0.3mm layer height):

• 2 - 3 perimeters
• 4 - 6 top and bottom solid layers
• 5 - 20% infill, gyroid would be ideal here for lower infill percentages
• Expected weight: ~700g

For the 100% infill version:

• 2 perimeters (since we're using 100% infill, less perimeters gives better dimensional accuracy)
• 2 top and bottom solid layers
• 100% infill
• 10% infill/wall overlap
• Z-hop on (unless your printer is really well tuned)
• 0.28mm layer height at most (assuming a 0.4mm nozzle)
• 10-25% fan speed
• Expected weight: ~4.5kg

Assembly

Refer to the photo for piece placement.