1 / 9
Luba AWD - 6 Blades cutting disk & blades cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Re-Designed for 3D printing
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 317
- Wydruki
- 0
- Wyświetlenia
- 1427
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (21)Powiązane
Description
As Mammotion's genuine cutting disk has been designed for injection molding, it is not optimized for 3D prints.
So, I redesigned it, with 3D printability in sight. It has 6 blades instead of 4 and a protection cover, to keep that all clean.
There is also a support, to help for the insertion of the Ruthex inserts.
- I printed all parts in PETG with a PLA interface layer on the cutting disk. The support released with no pain and the supported bottom surface is perfect.
- The cover can be srewed to the disk with M3x12 Chamfered screws. But this is optional, as the cover is self-centering and hold by the blade screws.
- There is a “Support tool” to maintain the disk flat when you insert the inserts. The threaded hole is to put a M5x8 Chamfered screw to act as a “depth stopper”
Needed Parts:
12 x Ruthex M4x8.1 inserts for the blades screws
12 x Luba Blades & Screws
Optional Parts:
12 x M3x12 Chamfered screws (Stainless Steel) To fix the cover to de disk (If you Want… I did Not!)