1 / 3
Prusa XL Enclosure with gas struts  Unifi G3/G4 instant camera mount — zdjęcie 1
1 / 3

Prusa XL Enclosure with gas struts Unifi G3/G4 instant camera mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Unifi G3/G4 Instant camera mount for the Prusa XL Enclosure with gas struts

Ocena
5 / 5
Polubienia
7
Pobrania
21
Wydruki
1
Wyświetlenia
467
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I installed the gas struts mod for the Prusa XL enclosure and the existing camera mount wouldn't work. It also wouldn't mount in the top hole. It was modeled from scratch but inspired by Robert's design.

Printed with a .4mm nozzle and .20mm layer height in PETG. I used 2x M3 10mm screws to mount it to the enclosure and 2x M3 6mm screws to mount the Unifi G4 instant base to the mount.

Tagi