WR250R Chain Seal Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided to try my best to reproduce the wr250r chain seal guard that protect the swing arm to get damage from the…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 198
- Wydruki
- 1
- Wyświetlenia
- 1226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Printed part is 325mm on the longest face, meaning that you need at least a 295x195 print bed to print this. or a 250x250 work too
I decided to try my best to reproduce the wr250r chain seal guard that protect the swing arm to get damage from the chains, printed and fit fine. Let me know how your print went, if I need to tweak my design so that it work on multiple printer (I only have 1 printer right now to test on).
the rectangle groove on the side of the bracket is for a foam that is at least 1.8 mm thick (that is from the original concept, I might try without the foam).
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator 5s
Rafts:
No
Supports:
No
Resolution:
200
Infill:
85
Filament:
taulman bridge nylon black
Category: Sport & Outdoors