1 / 5
Hip strap holder for Fjällraven raven backpack — zdjęcie 1
1 / 5

Hip strap holder for Fjällraven raven backpack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A little stopper that keeps a strap from falling out of the hole in the bottle pocket.

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
251
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I got my straps from an old backpack, so they where already stitched in the ends, but all you really do is put the stopper on the inside of the water bottle pocket, and then push the strap out the hole. 

It is also possible to put it in through the other side, and you need to do that if the buckle on the strap is sown to it.

The part will lay kinda' like this on the inside, so the bottom part of the “L” is just for security if you pull up in the straps.

My backpack is the 28 L variation, but i suspect that the 20 L version is the same.

I used the Squinn's Strong buckle, because there is a buckle for 2,5 cm.

Onshape link

Tagi