1L mountable bottle holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a mountable holder for 1L bottles. Initially designed for isopropanol bottle, but usable for others. Mountable.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Why i made this.
I design this to organize my desk en easier access.
Made it mountable with 4 metric M6 screws so i cloud hang it to my desk close to the printer.
At the front there is a opening made so there is a better view for the bottle placed inside.
Time of use.
I use i now about 3 - 4 months, i'm happy with the design it works great.
Conclusion.
Bottles go's smooth in and out what was the whole idea, more space on desk and easy access.
Would i print it again for other bottles?, yes sure i would for in my basement or so.
Print information.
I recommend 100% infill.
My settings:
| Infill: 100% | Filament used: 52,33 Meters |
| Layer hight: 0.20 quality | Weight: 156 Grams |
| Support: None | Print time normal mode: 12 hours 53 minutes |
| Note: Remember print time in quit mode will be a bit longer about 5 minutes. | |