Sawtooth Picture Hanger (Glue-On)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If your picture frame comes with no way to hang it...
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 283
- Wydruki
- 6
- Wyświetlenia
- 1157
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
When I wanted to hang a picture, I noticed that the frame had no way to hang it. The frame was too flat to mount anything. The picture itself was very thin and laminated, so I could not screw anything…
I came up with this glue-on picture hanger which I glued to the back of the picture with hot glue.
It is printed in black PETG with supports only on the printbed to support the actual sawtooth hanger.
For glueing use a lot of hot glue so that it gets pressed into the holes for extra strength.
UPDATE:
As requested, I also uploaded an STL without the holes. No guarantee though that the glue will bond strong enough to the print.