S4 Dryer Extender for Filamentalist install
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rises the top of the S4 Dryer to allow for Filamentalist install for customer base feet.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with ABS or other high temp filament.
I printed with tree support without issue.
Step files included since they are a remix of Sunlu's release.
Included the PDF from Sunlu as well for some direction.
The covers can be removed by bowing the center of the lid away from the pins/hinge and gently pulling it forward.
Should be no need to remove the center structure from the dryer unless you use larger spools.
Updated with Split version for smaller printers. The test print prints nice and snug with ABS. Still might want to put a drop of super glue or your preferred glue just to lock them in place. Full split model not tested.