Ubiquiti UDM SE port covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Port covers to dim the UDM SE ethernet activity lights. Can be installed/removed without unplugging all the cables.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This version of the port cover splits into a piece for the upper four (LAN) ports that can be slid on from the top without unplugging the cables and stays by gravity and friction and a piece for the lower four LAN ports and WAN 2.5Gbase-T port that can be wiggled into place without unplugging the cables and stays by friction and hooking above the WAN cable.
3D printing might not be stiff enough to work well, especially for the lower half. I had these laser cut out of 0.040" aluminum by Fabworks. (At the time, the two pieces together cost less than $3, but that's well below the single-order minimum.)