Modular IR Emitter Tower and Stand For VR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of modular parts I made to create an IR Emitter tower and VR Equipment stand for my Quest 3 setup.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
I created a modular stand for holding my Quest 3 VR Headset, controllers, two portable power banks. It also includes a top cap on which an IR emitter can be mounted to allow for using VR in a dark room.
In testing configurations out, I feel like 56" tall was about the optimum height for getting the IR emitter decently high enough while also ensuring my gear sitting on the stand still had good stability and low risk of the stand getting knocked over.
The pictured configuration was made with:
4 legs out of 5 that can fit in the base
1 Base pole
2 Pole extender segments
1 Headset/Power Bank/Controller caddy module
1 IR Emitter Mount/pole cap piece.